|
|
|
|
|
|
Design
As with other Mabey products, the ParkUp system has been
designed in-house by Mabey engineers using their experience and quality
procedures established over many years. Scheme designs are also prepared
in-house all the way from feasibility stage through to final design and
installation planning. This ensures that clients receive a consistently
high quality level of service.
|
 |
Technical Standards
The ParkUp system has been designed to standards which
apply to permanent car parks including the following:
- BS 5950 – 1:2000 – Structural Use of Steelwork in Building
Part 1: Code of Practice for design – Rolled and welded sections
- BS 5950 – 8:2000 – Structural Use of Steelwork in Building
Part 8: Code of Practice for fire resistant design
- BS 6180:1999 - Code of Practice for Barriers in and About Buildings
- BS 7818:1995 – Specification for Pedestrian Restraint Systems in Metal
- BS 6399 – 1:1996 – Loadings for Buildings
Part 1 – Code of practice for dead and imposed loads
Part 2 – Code of practice for wind loads
Part 3 – code of practice for imposed loads
- BS EN 12056 – 3:2000 – Gravity Drainage Systems Inside Buildings
Part 3 – Roof drainage, layout and calculation
- BS 7671:2008 – IEE Wiring Regulations. 17th Edition
Requirements for Electrical Installations
- BS EN 12464-1:2002 - Light and Lighting, Lighting of Workplaces
- Building Regulations Including:
Part A - Structures
Part B - Fire Safety
Part K - Protection from falling, collision and impact
- Guidance Document:
Design Recommendations for Multi-Storey and Underground Car Parks, Third Edition as published by The Institution of Structural Engineers (June 2002)
|
|
A data sheet with detailed specification is available by email,
please email us to obtain your copy.
|
|
|
|
|
